I wouldn’t call myself a woodworker — I’m just a maker. Most of what I make, apart from some software concepts and a few computers, is from wood, yes, so I’m more of a wood-maker.
I do spend some time skimming through the assorted YouTube videos of people’s projects and often find some inspiration for my own projects.
One of the things upon which I depend, like many others, is mechanical fasteners to screw things together.
Drilling pilot-holes is better than simply forcing a screw into wood and risking a split or tear-out or absurd amounts of torque to drive a screw (and break its head off). And countersinking the screw-head is better than leaving it protruding from the surface or crushing a portion of the surface.
So, a pilot-hole and countersink. They often need to be done together.
It seems that often times, makers have separate bits to do each task. Drill one, swap the bit, drill another. Thankfully, the world has embraced keyless chucks — imagine how much of a pain in the ass it would be to simultaneously juggle bits, screws, a chuck key…
So, rather than juggle a pilot drill bit and a countersink bit, save a few bucks (and headaches) and make the small purchase to get a single bit that will both drill and a pilot-hole and countersink in one shot.
These are absolutely awesome.
And with the collar, I can set it to countersink the screw-heads to exactly the same depth every single time. There is a limitation, of course, I can’t use just one tool to do everything with screws. I use two drills: one for the countersink/pilot bit, and another for the actual T-25* bit to drive screws.
Kick your creations up a few notches.
While you’re at it, pick up a few self-centering drill bits as well.
* Phillips heads are so last-century.